Avaya P332MF Manual Do Utilizador
Appendix A
Specifications
154
Avaya P332MF User’s Guide
Removing an Existing Expansion Module
1
Loosen the screws by turning the knobs.
2
Grasp the two knobs one near each side of the front panel, and pull gently but
firmly towards yourself.
firmly towards yourself.
3
Insert another expansion module or the blanking plate.
Note:
The Avaya P330 switch must not be operated with the expansion slot open;
the expansion module should be covered with the supplied blanking plate if
necessary.
necessary.
Note:
X330GT2 Modules are hot swapable and can be inserted or removed in an
operating base unit.
Cabling
A Category 5 copper cable with RJ-45 termination should be used. You should use
all eight wires in the cable.
The maximum copper cable length connected to a 1000Base-T port is 100 m
(328 ft.)
all eight wires in the cable.
The maximum copper cable length connected to a 1000Base-T port is 100 m
(328 ft.)