Avaya M770 Manual Do Utilizador
Avaya M770 ATM Switch User’s Guide
199
Chapter 15
Managing the LES/BUS
This chapter describes how to use the command-line interface to manage the LES/
BUS in an Avaya M770 ATM Switch. For information about how to access and use
the Avaya M770 ATM Switch command-line interface, see Chapter 3, “How to Use
the Command-line Interface“.
BUS in an Avaya M770 ATM Switch. For information about how to access and use
the Avaya M770 ATM Switch command-line interface, see Chapter 3, “How to Use
the Command-line Interface“.
Creating a new LES
Each Avaya M770 module can provide up to 16 combined LES/BUS. If the LECS is
hosted in an Avaya M770 then an Avaya LES will use a proprietary “automatic LES
address determination method” to register with the LECS. For more information
about the proprietary method and different types of LES modes supported, see in
Chapter 13, “LANE Services”.
When creating a new LES you should note the following:
•
hosted in an Avaya M770 then an Avaya LES will use a proprietary “automatic LES
address determination method” to register with the LECS. For more information
about the proprietary method and different types of LES modes supported, see in
Chapter 13, “LANE Services”.
When creating a new LES you should note the following:
•
If the LECS is hosted in a non-Avaya device, the LES mode should be set to
“manual”.
“manual”.
Note:
If the LES mode is set to “manual” and you move the LES then you will need
to manually re-configure the LECS to find the LES.