Avaya M770 Manual Do Utilizador

Chapter 15

Managing the LES/BUS

204

Avaya M770 ATM Switch User’s Guide

To display the ATM Forum compliant statistics for a LES, use the 

lane les 

stats 

command. 

To enable or disable a LES, use the 

lane les state

 command. 

The above command will take immediate effect. The command must be used 

with care as all LECs will be thrown off the ELAN hosted by the LES.

Command:

M15-155s8:/>lane les stats <elan-name>

Parameters:

<elan-name>

The ELAN name that hosts the LES.
This parameter is case-sensitive.

Example:

M15-155s8:/>lane les stats default

Output:

Number of successful Join responses 23

Number of version not supported errors 0

Number of invalid request parameters errors 0

Number of duplicate LAN destination errors 0

Number of duplicate ATM address errors 0

Number of insufficient resources to grant errors 0

Number of access denied for security reasons errors 0

Number of invalid LEC ID errors 0

Number of invalid LAN destination errors 0

Number of invalid ATM address errors 0

Number of mal formed request 0

Number of registration failures 0

Number of LE_ARP_REQUEST frames received by the LES 4498

Number of LE_ARP_REQUESTs that the LES forwarded 2

Command:

M15-155s8:/>lane les state <elan-name> <param>

Parameters:

<elan-name>

The name of the ELAN that currently hosts the LES that you 
wish to change or display. This parameter is case-sensitive.

<param>

To activate the LES enter either “on” or “enable”.
To deactivate the LES enter “off” or “disable”.