Avaya M770 Manual Do Utilizador

Chapter 16

Managing an ELAN

222

Avaya M770 ATM Switch User’s Guide

To delete an ELAN client mapping, use the 

lane elan client delete

 

command:

The above command does not affect clients that are already registered and 

joined to the ELAN. If you want to make sure that any deleted clients are no longer 
using the ELAN then you must restart the LES for the ELAN. If there are distributed 
LES, you must restart each one that has distributed clients. Use the 

lane les 

restart

 command. This will force all clients off the ELAN and all clients will have 

to re-register. 

This command is only valid if the specified ELAN supports distributed LANE 
Services. You need to change the ELAN autovers to distributed before you can 
change the LES address that a LEC will call.
For information about the different LES address formulas that can be selected for a 
distributed ELAN, see LEC Assigned for a Distributed ELAN in Chapter 13, “LANE 
Services“.

You must manually change the ELAN autovers to distributed in order to 

execute the command. If the ELAN is in autosense and has learned that the 
registration mode is distributed (displayed as “distributed*”), this command will 
not be executed.

Command:

M15-155s8:/>lane elan client delete <alias | atm | mac> 

<id>

Example:

M15-155s8:/>lane elan client delete mac 2

Parameters: 

<alias|atm|mac>

Select which type of client mapping is to be deleted.

<id>

This is the identifier for the mapping you wish to 
delete.
Use the 

lane elan client show

 command to 

display the identifiers for the mappings. For more 
information about this command, see “Displaying 
ELAN Client Mappings” earlier in this chapter.