Avaya M770 Manual Do Utilizador

Appendix B

Using BOOT Loader

276

Avaya M770 ATM Switch User’s Guide

You can restore an old configuration file stored in the flash directory that was 
generated with the

system snapshot

command.

To activate a configuration file, use the

flash config

command.

The restored configuration file will only be activated when the switch is next 

rebooted.

To deactivate an active configuration file, use the 

flash config 

disable

command.

To delete a file from the flash memory bank, use the

flash delete

command. 

You will be asked to confirm the deletion.

Once a file is deleted it cannot be recovered. The file must be downloaded 

again. 
You must not delete the config.data file without consulting Avaya Technical Support.

Command:

M15-155s8:/>flash config <filename>

Example

M15-155s8:/>flash config new_cfile

Parameters: 

<filename>

The name of the configuration file that you wish to 
activate

Command:

M15-155s8:/>flash config disable

Output:

Active configuration file has been disabled.

Command:

M15-155s8:/>flash delete <filename>

Example

M15-155s8:/>flash delete m770ATM

Parameter: 

<filename>

The name of the file you wish to delete from the 
flash directory.