Avaya M770 Manual Do Utilizador
Chapter 6
Managing Virtual Ports
Avaya M770 ATM Switch User’s Guide
67
Enabling ILMI on a virtual port
To enable ILMI on a virtual port, use the
vport enable
command.
Note:
You must disable the virtual port before you can change or reset any virtual
port parameters. For more information about how to disable a virtual port, see
“Disabling a virtual port” on page 65.
“Disabling a virtual port” on page 65.
Enabling ILMI polling on a virtual port
To enable ILMI polling on a virtual port, use the
vport enable
command.
Enabling ILMI multiple registration
A given address can be registered via ILMI on multiple ports.
To enable ILMI registration on multiple port, use the
To enable ILMI registration on multiple port, use the
vport enable
command.
Parameters:
<vport id>
The virtual port in the form <slot>.<port>.<virtual port number>.
ilmimultireg
ILMImultireg is an enhancement to ILMI, when ILMI is disabled,
ILMImultireg is also disabled.
By default
ILMImultireg is also disabled.
By default
ilmimultireg
is enabled on a M770 ATM Switch.
Command:
M15-155s8:/>vport enable <vport id> ilmi
Example:
M15-155s8:/>vport enable 8.1.0 ilmi
Parameters:
<vport id>
The virtual port in the form <slot>.<port>.<virtual port number>.
ilmi
ILMI is a protocol used by a switch to learn about an attached
device.
device.
Command:
M15-155s8:/>vport enable <vport id> poll
Example:
M15-155s8:/>vport enable 8.1.0 poll
Parameters:
<vport id>
The virtual port in the form <slot>.<port>.<virtual port number>.
poll
ILMI polling is a mechanism used by the M770 ATM Switch to
ensure that the same device is still attached.
Since ILMI polling is an enhancement to ILMI, ILMI must already
be enabled.
ensure that the same device is still attached.
Since ILMI polling is an enhancement to ILMI, ILMI must already
be enabled.
Command:
M15-155s8:/>vport enable <vport id> ilmimultireg
Example:
M15-155s8:/>vport enable 8.1.0 ilmimultireg
Parameters:
<vport id>
The virtual port in the form <slot>.<port>.<virtual port number>.
ilmimultireg
ILMImultireg is an enhancement to ILMI, when ILMI is disabled,
ILMImultireg is also disabled.
By default
ILMImultireg is also disabled.
By default
ilmimultireg
is enabled.