Avaya M770 Manual Do Utilizador

Chapter 6

Managing Virtual Ports

Avaya M770 ATM Switch User’s Guide

79

You can reset all configurable parameters for a specific virtual port to their default 
values.

You must disable the virtual port before you can change or reset any virtual 

port parameters. For more information about how to disable a virtual port, see 
“Disabling a virtual port” on page 65

To reset all configurable parameters on a disabled virtual port to their default 
values, use the

vport reset all

command. 

Managing the Probe Method

You can set the method of probing that the switch will use to find proprietary 
features on a remote device. This can be either via the “mib” or the “sysobject id” 
library. By default the method of probing is set to “mib”. You will need to change 
the method of probing to “sysobjectid”, if your remote device does not allow 
probing of its “mib”.
To set the method of probing for a virtual port, use the

vport probe

 command. 

To display the method of probing for a virtual port, use the

vport 

probe

command. 

Command:

M15-155s8:/>vport reset all <vport id>

Parameter:

<vport id>

The virtual port in the form <slot>.<port>.<virtual port number>

Command:

M15-155s8:/>vport probe <vport id> [mib | sysobjectid]

Parameters:

<vport id>

The virtual port in the form <slot>.<port>.<virtual port number>

[mib | 

sysobjectid]

Sets the method of probing for proprietary features on a virtual 
port either via the mib or the sysobject id library.

Command:

M15-155s8:/>vport probe <vport id>

Output:

Method of probing for proprietary features: MIB

Parameter:

<vport id>

The virtual port in the form <slot>.<port>.<virtual port number>