Avaya P130 Manual Do Utilizador

Chapter 6        Avaya P130 CLI

Avaya P130 User’s Guide

103

Use the 

set ppp incoming timeout command to configure the number of 

minutes until the system automatically disconnects an idle PPP incoming session.

The syntax for this command is:
set ppp incoming timeout <timeout-in-minutes> 

Example:
P130-1# set ppp incoming timeout 20
PPP incoming sessions will automatically disconnect after 20 
minutes of idle time.

Use the 

show ppp configuration command to view the ppp configuration. 

The syntax for this command is:
show ppp configuration 

Example:
P130-N> show ppp configuration
PPP baud rate is 38400
PPP incoming timeout is 0 minutes
PPP Authentication Parameters:
------------------------------
Incoming:       PAP  

<timeout-in-minutes>

Number of minutes between 0 to 999 until the system 
automatically disconnects an idle PPP session. 
Setting the value to 0 disables the automatic 
disconnection of idle sessions. The default is no 
timeout.