Avaya P130 Manual Do Utilizador

Chapter 6        Avaya P130 CLI

Avaya P130 User’s Guide

115

To clear the community string defined for read-only access:
P130-1# set snmp community read-only
SNMP read-only community string cleared.

Use the 

set snmp retries command to set the number of retries initiated by the 

Device Manager application when it tries to send SNMP messages to the device.

The syntax for this command is:
set snmp retries <number>

Example:
P130-1# set snmp retries

Use the 

set snmp timeout command to set the SNMP timeout in seconds. This 

command is useful for access using the Device Manager.

The syntax for this command is:
set snmp timeout <number>

Example:
P130-1# set snmp timeout 2000

Use the 

set snmp trap auth commands to enable/disable the sending of SNMP 

traps upon SNMP authentication failure.

The syntax for this command is:
set snmp trap {enable|disable} auth

Example:
P130-1# set snmp trap enable auth
Authentication trap enabled

<number>

Number of retries

<number>

Time in seconds