Avaya P130 Manual Do Utilizador
Chapter 6 Avaya P130 CLI
Avaya P130 User’s Guide
81
FlowControl Commands
Set internal buffering Command
Use the
set internal buffering command to set the size (either Maximum
or Minimum) of the Receive (Rx) buffer allocated to each port of the specified
module. This command is meaningless when any port of the module is operating
with flow control ON. You must reset the switch after setting the internal buffering
parameters.
module. This command is meaningless when any port of the module is operating
with flow control ON. You must reset the switch after setting the internal buffering
parameters.
The syntax for this command is:
set internal buffering <mod_num> {max|min}
set internal buffering <mod_num> {max|min}
Example:
P130-N> set internal buffering 1 max
Done.
P130-N> set internal buffering 1 max
Done.
Show internal buffering Command
Use the
show internal buffering command to show the size options
(Maximum, Minimum, or Medium) of the Receive (Rx) buffer allocated to each port
of the specified module.
of the specified module.
The syntax for this command is:
show internal buffering [<mod_num>]
show internal buffering [<mod_num>]
Example:
P130-N> show internal buffering 1
P130-N> show internal buffering 1
Module Internal Buffer
------ ---------------
1 med
------ ---------------
1 med
Set port flowcontrol Command
Show port flowcontrol Command
max
Sets the internal receive buffer to its maximum size.
min
Sets the internal receive buffer to its minimum size (this is the
Default).
Default).
<mod_num>
Module number