Avaya P330-ML-ML Manual Do Utilizador

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

Avaya P330-ML Reference Guide

93

| on | proprietary}

Example: 

User level: privileged, supervisor.
Use the set port level command to set the priority level of a port or range of 
ports on the switching bus. Packets traveling through a port set at normal priority 
should be served only after packets traveling through a port set at high priority are 
served. 

The syntax for this command is:

set port level <module>/<port> [value]

receive

Indicates whether the port can receive administrative status 
from a remote device. 
Available only for Gigabit Ethernet modules with negotiation set to off.

send

Indicate whether the local port can send administrative status to 
a remote device. 
Available only for Gigabit Ethernet modules with negotiation set to off.

all

Send and receive (symmetric flow control).

module

Number of the module.

port

Number of the port on the module.

off

Used with receive to turn off an attached device's ability to send 
flow-control packets to a local port. Used with send to turn off 
the local port's ability to send administrative status to a remote 
device.

on

Used with receive to require that a local port receive 
administrative status from a remote device. Used with send, the 
local port sends administrative status to a remote device.

P330-N# set port flowcontrol receive 5/1 on

Port 5/1 flow control receive administration status set to on

module

Number of the switch.