Avaya P330-ML-ML Manual Do Utilizador
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide
169
show port trap
User level: user, privileged, supervisor
Use the show port trap command to display information on SNMP generic
link up/down traps sent for a specific port.
Use the show port trap command to display information on SNMP generic
link up/down traps sent for a specific port.
The syntax for this command is:
show port trap [<module>[/<port>]]
Example:
show port vlan-binding-mode
User level: user, privileged, supervisor
Use the show port-vlan-binding command to display port vlan binding mode
information.
Use the show port-vlan-binding command to display port vlan binding mode
information.
The syntax for this command is:
show port vlan-binding-mode [module[/port]]
module
(Optional)
(Optional)
Number of the switches. If you do not specify a number, the
ports on all the switches are shown.
ports on all the switches are shown.
port
(Optional)
(Optional)
Number of the port on the switch. If you do not specify a
number, all the ports on the switch are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
number, all the ports on the switch are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
P330-N>show port trap 4/1
Port 4/1 up/down trap is disabled
module
Number of the switch. If you do not specify a number, the ports
on all the switches are shown.
on all the switches are shown.
port
(Optional)
(Optional)
Number of the port on the switch. If you do not specify a
number, all the ports on the switch are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.
number, all the ports on the switch are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.