Avaya P330-ML-ML Manual Do Utilizador
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide
233
Example:
ip bootp-dhcp relay
User level: privileged, supervisor.
L If you are at the ”privileged” level, you can only access this command in
L If you are at the ”privileged” level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter configure mode if necessary.
Type configure at the command prompt to enter configure mode if necessary.
The ip bootp-dhcp command enables relaying of bootp and dhcp requests to the
bootp/dhcp server.
The no ip bootp-dhcp command disables bootp/dhcp relay.
The default state is disabled.
bootp/dhcp server.
The no ip bootp-dhcp command disables bootp/dhcp relay.
The default state is disabled.
The syntax for this command is:
[no] ip bootp-dhcp relay
Example:
To enable relaying of BOOTP and DHCP requests:
To enable relaying of BOOTP and DHCP requests:
To disable relaying of bootp and dhcp requests:
Router-N(configure)# ip access-list-owner 101 admin
Done!
Router-N(configure)# ip bootp-dhcp relay
Done!
Router-N(configure)# no ip bootp-dhcp relay
Done!