Avaya P330-ML-ML Manual Do Utilizador
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
240
Avaya P330-ML Reference Guide
User level: privileged, supervisor.
Use the CLI prompt length command to set the length of the command prompt that
is displayed.
Use the CLI prompt length command to set the length of the command prompt that
is displayed.
The syntax for this command is:
prompt-length <full | prompt-size>
Example:
reset
User level: user, privileged, supervisor
Use the reset command to restart an individual switch.
Use the reset command to restart an individual switch.
The syntax for this command is:
reset
Example:
router ospf
User level: privileged, supervisor.
L If you are at the ”privileged” level, you can only access this command in
L If you are at the ”privileged” level, you can only access this command in
Configure mode.
Type configure at the command prompt to enter interface mode.
Type configure at the command prompt to enter interface mode.
Use the router ospf command to enable the OSPF protocol on the system and
enter the “router ospf” context.
Use the no router ospf command to disable the OSPF one the system.
enter the “router ospf” context.
Use the no router ospf command to disable the OSPF one the system.
full
return the CLI prompt to its full length
prompt-size
size of the CLI prompt in characters
Router-N> prompt-length 3
~N>
Router-N> reset
This command will force a switch-over to the master module
and disconnect your telnet session.
Do you want to continue (y/n) [n]? y
Connection closed by foreign host.