Avaya P330-ML-ML Manual Do Utilizador

Chapter 3        Avaya P330-ML Layer 3 CLI Commands

296

Avaya P330-ML Reference Guide

Router SRRP Context

L You can only access these commands in the “Router-SRRP” context. 

Type router srrp at the command prompt to enter the “Router -SRRP” 
context if necessary.

User level: user, privileged, supervisor
Use the

poll-interval

command to configure the polling interval in seconds 

used by SRRP. 
Use the

no poll-interval

command to return to the default polling interval of 

1 second.

The syntax for this command is:Syntax

[no] poll-interval <poll interval>

Example:

User level: user, privileged, supervisor
Use the

timeout

command to configure the timeout (in seconds) after which 

SRRP declares the main router dead if it does not reply to polling. 
Use the

no

timeout

form command to return the timeout to default timeout 

interval of 12 seconds.

The syntax for this command is:

[no] timeout <timeout>

Example:

L The timeout should be at least twice as long as the interval.

poll interval

Poll interval (integer value, in seconds)

Router-N# poll-interval 4

timeout

An integer (in seconds)

Router-N# timeout 6