Avaya P330-ML-ML Manual Do Utilizador

Chapter 2        Avaya P330-ML Layer 2 CLI Commands

28

Avaya P330-ML Reference Guide

User level: supervisor
Use the copy tftp module-config command to download the switch-level 
configuration from a saved file into the current NVRAM running configuration of a 
switch from a TFTP server.  
L Only parameters that differ from the factory default settings for the switch are 

included in the configuration file. Therefore, it is important to reinitialize the 
NVRAM to the factory default settings before downloading configuration files 
to the switch. To reinitialize the NVRAM, run the nvram initialize 
command.

The syntax for this command is:

copy tftp module-config <filename> <ip>

Example (for Windows):

Example: (for Unix):

User level: supervisor
Use the copy tftp stack-config command to download the stack-level 
configuration from a saved file into the current NVRAM running configuration 
from a TFTP server. 
L Only parameters that differ from the factory default settings for the switch are 

included in the configuration file. Therefore, it is important to reinitialize the 
NVRAM to the factory default settings before downloading configuration files 
to the switch. To reinitialize the NVRAM, run the nvram initialize 
command.

filename

The file name (full path)

ip

The ip address of the TFTP server

Router-N# copy tftp module-config  c:\config\switch1.cfg 

Router-N# copy tftp module-config /folder/startup.cfg