Avaya P330-ML-ML Manual Do Utilizador
Chapter 2 Avaya P330-ML Layer 2 CLI Commands
60
Avaya P330-ML Reference Guide
Example:
set arp-aging-interval
User level: privileged, supervisor.
Use the set arp-aging interval command to set the ARP table aging interval
for entries in the agent Layer 2 ARP table.
The entry is deleted at the end of every aging interval. The default value is 10
minutes.
Use the set arp-aging interval command to set the ARP table aging interval
for entries in the agent Layer 2 ARP table.
The entry is deleted at the end of every aging interval. The default value is 10
minutes.
The syntax for this command is:
set arp-aging-interval <value>
Example:
set arp-tx-interval
User level: privileged, supervisor.
Use the set arp-tx-interval command to set the keep-alive frames sending
interval. The keep-alive frames in ARP packets for the P330-ML agent are used to
ensure connectivity with the P330-ML agent is always achieved.
Use the set arp-tx-interval command to set the keep-alive frames sending
interval. The keep-alive frames in ARP packets for the P330-ML agent are used to
ensure connectivity with the P330-ML agent is always achieved.
The syntax for this command is:
set arp-tx-interval <value>
Example:
P330-N# set allowed managers ip add 149.49.32.134
Ip was added to the table
value
The number representing the interval, from 0-10 minutes. 0 -
arp-aging interval is 20 minutes.
arp-aging interval is 20 minutes.
P330-N# set arp-aging-interval 10
ARP table aging interval was set to 10 minutes.
value
The interval in seconds. (0-3600)
0 disables the transmission of the keep-alive frames.
0 disables the transmission of the keep-alive frames.
P330-N# set arp-tx-interval 15
ARP tx interval was set to 15 seconds.