Avaya 882 Manual Do Utilizador
Document No. 10-300077, Issue 2
A-5
Upgrading the Application Software
CAUTION:
CLI Command
To back up the current configuration to a TFTP server, use the following
command:
command:
#
copy startup-config tftp <filename_opt_path> <tftp-server>
Downloading Application Software
You can download new application software from a TFTP server to an APP
memory location by using either the Web agent or the CLI.
memory location by using either the Web agent or the CLI.
When upgrading the switch from v5.x application software to v6.0 or
later, you must download v6.x to the APP2 memory location. If you
download v6.x to APP1, and store v5.x software in APP2, the 6.x
software is corrupted. Once v6.x software is successfully stored in
APP2, you can download v6.x to APP1.
later, you must download v6.x to the APP2 memory location. If you
download v6.x to APP1, and store v5.x software in APP2, the 6.x
software is corrupted. Once v6.x software is successfully stored in
APP2, you can download v6.x to APP1.
Web Agent
Procedure
Procedure
To download new application software from a TFTP server to an APP
memory location by using the Web Agent:
memory location by using the Web Agent:
* Note: The switch does not support Exceed TFTP server software.
1. In the navigation pane, expand the System > Configuration > TFTP
Update folders.
2. Select System.
The System TFTP Update Web page is displayed in the content pane
(
(