Avaya P580 Manual Do Utilizador

610-0184-095

 10

June 14, 2001

* Note:  Avaya recommends that you mirror traffic to a port 

of the same speed or faster than the source port. 

■

<channel>

 is the mirror channel that you want to use (1-4).

■

{TX| RX |Both}

 is the direction of traffic that you want to 

mirror. 

* Note:  You can mirror transmit traffic of only one source 

port to the mirror port. You cannot mirror transmit 
traffic of multiple source ports to one mirror port. 

■

{always | disable | periodic}

 is how often you 

want the mirror port to receive traffic samples. 

■

<max-packets-sec-value> 

is the maximum number of 

packets per second that you want the mirror port to receive. 
(Enter a value for this variable only if you set the sampling to 
periodic.)

To remove port mirroring, use the following CLI command:

>(config)# clear port mirror fabric_mode2 

channel <channel>

where 

<channel>

 is the mirror channel that you want to remove. 

To view information about port mirroring, use the following CLI 
command: 

>(config)# show port mirror fabric_mode2

This command displays the source ports, mirror port, direction being 
mirrored, sampler type, and maximum packet per second for all port 
mirrors that are currently set up.