Avaya P3343T-ML Manual Do Utilizador
Chapter 6 Avaya P334T-ML Front and Rear Panels
Avaya P334T-ML User’s Guide
29
SYS
System Status
OFF – Module is a slave in a stack
ON – Module is the master of the stack and
the Octaplane and Redundant (optional)
cable(s) are connected correctly.
This LED will also light in Standalone mode.
the Octaplane and Redundant (optional)
cable(s) are connected correctly.
This LED will also light in Standalone mode.
Blink – Box is the master of the stack and the
Octaplane is in redundant mode.
Octaplane is in redundant mode.
ROUT
Routing Mode
OFF – Layer 2 mode
ON – Router mode
The following Function LEDs apply to all ports
LNK
Port Status
ON – Link is OK
OFF – Port is disabled
Blink – Port is enabled, but Link is down
OFF – Port is disabled
Blink – Port is enabled, but Link is down
COL
Collision
OFF – No collision or full-duplex port for
ports 1 -48; always OFF for ports 51-52.
ON – Collision occurred on line.
ports 1 -48; always OFF for ports 51-52.
ON – Collision occurred on line.
Tx
Transmit to line
OFF – No transmit activity
ON – Data transmitted on line from the
module
module
Rx
Receive from line
OFF – No receive activity
ON – Data received from the line into the
module
module
FDX
Full Duplex mode
ON – Full duplex mode (ports 1-48)
OFF – Half duplex mode (ports 1-48)
Always ON for ports 51,52 (full-duplex mode
only)
OFF – Half duplex mode (ports 1-48)
Always ON for ports 51,52 (full-duplex mode
only)
Table 6.1
Avaya P334T-ML LED Descriptions (Continued)
LED Name
Description
LED Status