Avocent SC8 DVI Folheto

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could 
void the user’s authority to operate the equipment. 

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the 
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case 
the user will be required to correct the interference at his own expense. 

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. 

UL, FCC, cUL, ICES-003, CE, VCCI, C-Tick 
Safety certifications and EMC certifications for this product are obtained under one or more of the following 
designations: CMN (Certification Model Number), MPN (Manufacturer’s Part Number) or Sales Level Model 
designation. The designation that is referenced in the EMC and/or safety reports and certificates are printed on the 
label applied to this product.

This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s 
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

NOTE: The AC inlet is the main disconnect.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions. 

•  Elevated Ambient Temperature: If installed in a closed rack assembly, the operation temperature of the rack

environment may be greater than room ambient. Use care not to exceed the rated maximum operating temperature of 
40° C for this product.

•  Reduced Air Flow: Installation of the equipment in a rack should be such that the amount of airflow required for safe

operation of the equipment is not compromised.

•  Mechanical Loading: Mounting of the equipment in the rack should be such that a hazardous condition is not

achieved due to uneven mechanical loading.

•  Circuit Overloading: Consideration should be given to the connection of the equipment to the supply circuit and

the effect that overloading of circuits might have on overcurrent protection and supply wiring. Consider equipment 
nameplate ratings for maximum current.

•  Reliable Earthing: Reliable earthing of rack mounted equipment should be maintained. Pay particular attention to

supply connections other than direct connections to the branch circuit (for example, use of power strips).

WARNING: To reduce the risk of electric shock or damage to your equipment: 

- Do not disable the power grounding plug. The grounding plug is an important safety feature. 

- Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times. 

- Disconnect the power from the switch by unplugging the power cord from either the electrical outlet or the appliance.