Lightwave Communications 8200 Manual Do Utilizador

 

24 

 

If it becomes necessary to reset the ServerSwitch 8200, the users may do so from the 
System Setup

System Setup menu.  Once at the System Setu

System Setup

p menu, access the defaults/flash 

update menu by pressing the 

<F1>

<F1> key.  Press and hold the <F12>

<F12> key, and then press 

the 

Y

Y key to confirm that the ServerSwitch parameters and server port names should be 

set to the factory default values.  The on-screen menu will temporarily disappear while 
all parameters are reset, and will reappear at the main on-screen menu once the 
parameters are reset.  The ServerSwitch will not be able to switch to another port or 
pass keyboard/mouse signals during the reset to factory defaults. 
 

The flash update feature allows the user to install newer versions of operating software 
in the ServerSwitch 8200 without removing the unit from its installation.  New software 
revisions will be released from time to time to add features to the ServerSwitch 8200 or 
make changes for customer requests.  Note that the users will not be able to switch 
server ports during the update. 
 
The binary file for the flash update can be downloaded from  
 

ftp://ftp.lightwavecom.com/pub/products/8200/software/ 

 
Materials: 

§ Laptop or other computer with RS-232 serial I/O port 
§ Serial cable with DB9 male end and mating connector for the above computer's 

serial port 

§ Communications software capable of XMODEM uploads 
§ ServerSwitch 8200 software update file 

 

 

DB9 cable connected for flash update