Brocade Communications Systems IPMC5000PEF Manual Do Utilizador

Output from the show ip pim bsr command (Continued)

RP

Indicates the IP address of the Rendezvous Point (RP).

NOTE
This field appears only if this device is a candidate BSR.

group prefixes

Indicates the multicast groups for which the RP listed by the previous field is a
candidate RP.

NOTE
This field appears only if this device is a candidate BSR.

Candidate-RP-
advertisement period

Indicates how frequently the BSR sends candidate RP advertisement messages.

NOTE
This field appears only if this device is a candidate BSR.

Displaying candidate RP information

To display candidate RP information, enter the following command at any CLI level.

device# show ip pim rp-candidate

Next Candidate-RP-advertisement in 00:00:10

  RP: 207.95.7.1

    group prefixes:

    224.0.0.0 / 4

  Candidate-RP-advertisement period: 60

This example show information displayed on a device that is a candidate RP. The next example shows
the message displayed on a device that is not a candidate RP.

device# show ip pim rp-candidate

This system is not a Candidate-RP.

Syntax: show ip pim [vrf vrf-name ] rp-candidate

This command displays candidate RP information for the VRF instance identified by the vrf-name
variable.

The following table describes the output from this command.

Displaying candidate RP information