Brocade Communications Systems IPMC5000PEF Manual Do Utilizador

MSDP source active cache (Continued)

Orig Peer

The peer from which this source-active entry was received.

Age

The number of seconds the entry has been in the cache

You can use the following command to filter the output to display only the entries matching a specific
source.

device#show ip msdp sa-cache 1.1.1.1 

You can use the following command to filter the output to display only the entries matching a specific
group.

device#show ip msdp sa-cache 239.1.1.1 

You can use the following command to filter the output to display only the SA cache entries that are

received from peers in the BGP AS Number 100.

device#show ip msdp sa-cache 100 

You can use the following command to filter the output to display only the SA cache entries that are

originated by the RP 1.1.1.1.

device#show ip msdp sa-cache orig-rp 1.1.1.1 

You can use the following command to filter the output to display only the SA cache entries that are

received from the peer 1.1.1.1.

device#show ip msdp sa-cache peer 1.1.1.1 

You can use the following command to display the rejected SAs. You can further narrow down by
quoting the reason for rejection.

device#show ip msdp sa-cache rejected  

You can use the following command to display the self-originated SAs.

device#show ip msdp sa-cache self-originated 

Displaying MSDP RPF-Peer

To display MSDP peer information for the RP 1.1.1.1, enter the following command.

device# show ip msdp rpf-peer 1.1.1.1

MSDP Peer Status Summary

KA: Keepalive SA:Source-Active NOT: Notification

Peer Address Peer As State KA SA NOT Age

In Out In Out In Out

40.40.40.3 1001 ESTABLISH 62 62 0 0 0 0 7

Brocade#

Syntax: show ip msdp [vrf vrf-name ] rpf-peer ip-addr

Displaying MSDP RPF-Peer