Brocade Communications Systems IPMC5000PEF Manual Do Utilizador

Syntax: show ipv6 pim [ vrfvrf-name ] interface [ ethernetslot/portnum | loopbacknum | venum ]

The vrf option allows you to display multicast boundary information for the VRF instance identified by
the vrf-name variable.

The ethernet port-number parameter specifies the physical port.

The loopback num parameter specifies the loopback port.

The ve num parameter specifies a virtual interface.

The following table displays the output from the show ip pim interface ethernet command.

Output from the show ipv6 pim interface ethernet command 

Interface

Name of the interface.

Global Address

IP address of the interface.

Port

Port number of the designated router.

Mode

PIM mode.

St

State.

TTL Thr

Time to live threshold.

Multicast Boundary

Multicast boundary, if one exists.

VRF

Name of the VRF.

DR Prio

Designated router priority.

Override Interval

Override interval in milliseconds.

Displaying a list of multicast groups

To display IPv6 PIM group information, enter the show ipv6 pim group command at any CLI level.

device# show ipv6 pim group

Total number of groups: 1

1    Group ff7e:a40:2001:3e8:27:0:1:2 

     Group member at  e3/1: v31

Syntax: show ipv6 pim [ vrf vrf-name ] group

The vrf parameter allows you to display IPv6 PIM group information for the VRF instance identified by
the vrf-name variable.

The following table displays the output from the show ipv6 pim group command.

Displaying a list of multicast groups