Brocade Communications Systems IPMC5000PEF Manual Do Utilizador

Qry

General Query

QryV2

Number of general IGMP V2 queries received or sent.

QryV3

Number of general IGMP V3 queries received or sent.

G-Qry

Number of group-specific queries received or sent.

GSQry

Number of group source-specific queries received or sent.

Mbr

The membership report.

MbrV2

The IGMP V2 membership report.

MbrV3

The IGMP V3 membership report.

IsIN

Number of source addresses that were included in the traffic.

IsEX

Number of source addresses that were excluded in the traffic.

ToIN

Number of times the interface mode changed from EXCLUDE to INCLUDE.

ToEX

Number of times the interface mode changed from INCLUDE to EXCLUDE.

ALLO

Number of times that additional source addresses were allowed on the interface.

BLK

Number of times that sources were removed from an interface.

Pkt-Err

Number of packets having errors, such as checksum.

Pimsm-snooping hello, join,
prune

Number of PIM sparse hello, join, and prune packets

Displaying querier information

You can use the show ip multicast vlan command to display the querier information for a VLAN. This
command displays the VLAN interface status and if there is any other querier present with the lowest IP
address. The following list provides the combinations of querier possibilities:

•

Active Interface with no other querier present

•

Passive Interface with no other querier present

•

Active Interface with other querier present

•

Passive Interface with other querier present

Displaying querier information