Brocade Communications Systems 53-1001762-01 Manual Do Utilizador

dot1x authentication

13

dot1x authentication

Enables dot1x on a port.

Synopsis

dot1x authentication

no dot1x authentication

Operands

none

Defaults

There are no defaults for this command.

Command

Modes

Interface configuration mode

Description

Use this command to enable dot1x on a port. Use the no dot1x authentication command to disable 
dot1x on the port and remove the configuration from 802.1X management.

Usage

Guidelines

There are no usage guidelines for this command.

Examples

To enable dot1x on a port:

switch(config)#interface tengigabitethernet 0/1

switch(conf-if-te-0/1)#dot1x authentication

See Also

none