Belkin F1DB102P Manual Do Utilizador
OVERVIEW
3
OVERVIEW
2
Equipment Requirements
Cables:
For each PS/2 computer to be connected to the OmniView E Series KVM
Switch, one VGA cable, one PS/2 keyboard cable, and one PS/2 mouse
cable is necessary. Keyboard and mouse cables must have PS/2 male to
PS/2 male connectors.
To support resolutions of up to 2048x1536@85Hz, use of a 75-Ohm
coaxial VGA cable is required to preserve signal integrity. Cables must
have HDDB15 female to HDDB15 male connectors.
The Belkin OmniView All-In-One Cable Kits offer the highest quality
possible to ensure that your data is optimally transmitted. All-In-One
Cable Kits are molded together for clean and organized setup, and
include PC99 color for easier identification and connection. Double-
shielded, strain-relief, ferrite-bead, PRO Series Plus cable kits include an
industry-standard, 14-pin coaxial VGA cable and nickel-plated
connectors for high-resolution applications. The Gold Series Cable Kits
have a custom 15-pin coaxial VGA cable and gold-plated connectors for
superior clarity and connectivity for maximum resolution. The following
cable kits are recommended for your OmniView E Series KVM Switch:
F3X1105-XX (PS/2 Style)
F3X1835-XX-GLD (PS/2 Style)
For each PS/2 computer to be connected to the OmniView E Series KVM
Switch, one VGA cable, one PS/2 keyboard cable, and one PS/2 mouse
cable is necessary. Keyboard and mouse cables must have PS/2 male to
PS/2 male connectors.
To support resolutions of up to 2048x1536@85Hz, use of a 75-Ohm
coaxial VGA cable is required to preserve signal integrity. Cables must
have HDDB15 female to HDDB15 male connectors.
The Belkin OmniView All-In-One Cable Kits offer the highest quality
possible to ensure that your data is optimally transmitted. All-In-One
Cable Kits are molded together for clean and organized setup, and
include PC99 color for easier identification and connection. Double-
shielded, strain-relief, ferrite-bead, PRO Series Plus cable kits include an
industry-standard, 14-pin coaxial VGA cable and nickel-plated
connectors for high-resolution applications. The Gold Series Cable Kits
have a custom 15-pin coaxial VGA cable and gold-plated connectors for
superior clarity and connectivity for maximum resolution. The following
cable kits are recommended for your OmniView E Series KVM Switch:
F3X1105-XX (PS/2 Style)
F3X1835-XX-GLD (PS/2 Style)
(-XX designates the length in feet)
OVERVIEW
The Belkin OmniView E Series KVM Switch allows you to control up to
four computers, depending on the model, with one keyboard, monitor,
and mouse. OmniView E Series KVM Switches support PS/2 input
devices (keyboard and mouse); VGA, SVGA, XGA, and XGA-II video;
and PS/2 output computers. With the use of an OmniView PS/2 MAC
Adapter or OmniView PS/2 SUN Adapter, the OmniView E Series can
also be used to conrol Mac and Sun
four computers, depending on the model, with one keyboard, monitor,
and mouse. OmniView E Series KVM Switches support PS/2 input
devices (keyboard and mouse); VGA, SVGA, XGA, and XGA-II video;
and PS/2 output computers. With the use of an OmniView PS/2 MAC
Adapter or OmniView PS/2 SUN Adapter, the OmniView E Series can
also be used to conrol Mac and Sun
®
computers.
Feature Overview
Hot Keys:
Hot keys allow you to select ports using designated key commands.
Control up to four computers, depending on the model, using a simple
hot key sequence on your keyboard. Full hot key instructions for usage
and commands are located in this manual, on page 12.
AutoScan:
The AutoScan feature allows you to automatically scan and monitor the
activities of all operating computers connected to your OmniView E
Series KVM Switch one by one. Usage instructions for AutoScan are
located in this manual, on page 13.
Video Resolution:
With a 400MHz video bandwidth, the OmniView E Series KVM Switch
is able to support video resolutions of up to 2048x1536@85Hz. To
preserve signal integrity at high resolutions, 75-Ohm coaxial VGA
cabling is required.
Front-Panel Push Button:
Push buttons conveniently located on the face of the OmniView E Series
KVM Switch allow for simple, manual port selection.
LED Display:
LEDs are added to the front of the OmniView E Series KVM Switch for
easy status monitoring. A lit LED indicates which computer the console
has control of. When using the front-panel push button, the LED will
light next to the corresponding active port.
Hot keys allow you to select ports using designated key commands.
Control up to four computers, depending on the model, using a simple
hot key sequence on your keyboard. Full hot key instructions for usage
and commands are located in this manual, on page 12.
AutoScan:
The AutoScan feature allows you to automatically scan and monitor the
activities of all operating computers connected to your OmniView E
Series KVM Switch one by one. Usage instructions for AutoScan are
located in this manual, on page 13.
Video Resolution:
With a 400MHz video bandwidth, the OmniView E Series KVM Switch
is able to support video resolutions of up to 2048x1536@85Hz. To
preserve signal integrity at high resolutions, 75-Ohm coaxial VGA
cabling is required.
Front-Panel Push Button:
Push buttons conveniently located on the face of the OmniView E Series
KVM Switch allow for simple, manual port selection.
LED Display:
LEDs are added to the front of the OmniView E Series KVM Switch for
easy status monitoring. A lit LED indicates which computer the console
has control of. When using the front-panel push button, the LED will
light next to the corresponding active port.
P73775-A-E Series-man.qxd 8/10/01 7:25 AM Page 2