McDATA 4314 Manual Do Utilizador

3. Open a Telnet session by entering the following command with the switch 

IP address. The default IP address is 10.0.0.1

telnet 10.0.0.1

4. Log in to the switch. The default account name and password are (admin, 

password).

Switch Login: admin

Password: ********

You can install EFCM BASIC on a Windows or Linux workstation. To install 
the EFCM BASIC application, do the following:

1. Close all programs currently running, and insert the EFCM BASIC 

Installation Disk into the management workstation CD-ROM drive.

2. In the upper left corner of the product introduction screen, click 

.

3. Locate your platform in the table and click Install.

If the product introduction screen does not open in step 2, open the CD with 
Windows Explorer and run the installation program with the following path:

data\files\Management_Software\Windows\Windows_5.02.x.xx.exe

Open the CD and run the installation program with the following path:

data/files/Management_Software/Linux/Linux_5.02.xx.xx.bin

If there is no CD-ROM icon, do the following:

1. Open an xterm or other terminal window.

2. Mount the CD-ROM. From a shell prompt, enter the following:

mount /mnt/cdrom

3. Change directory to the location of the install program:

cd /mnt/cdrom/data/files/Management_Software/Linux