McDATA 3232 Manual Do Utilizador
2
2-44
Installation Tasks
Figure 2-44
EFCSERVER\srvacc Properties Dialog Box (Group Membership Tab)
3. Based on the level of access to be changed, select the Standard user,
Restricted user, or Other radio button. If the Other radio button is
selected, choose the type of access from the adjacent list box.
selected, choose the type of access from the adjacent list box.
4. Click OK. The new user information is added and the
EFCSERVER\srvacc Properties dialog box closes. Record the user
information for reference if the management server hard drive
fails and must be restored.
information for reference if the management server hard drive
fails and must be restored.
5. If no other users are to be changed, click OK to close the Users and
Passwords dialog box.
6. Click close (X) at the upper right corner of the Control Panel
window to return to the Windows 2000 desktop.
Task 10: Set Management Server Date and Time
The SAN Management application’s audit and event logs are
stamped with the date and time from the management server. The
switch’s system clock is synchronized with date and time of the
management server by default. To set the server date and time:
stamped with the date and time from the management server. The
switch’s system clock is synchronized with date and time of the
management server by default. To set the server date and time:
1. At the Windows 2000 desktop, click Start, then select Settings,
then Control Panel. The Control Panel window displays.