McDATA 3232 Manual Do Utilizador
4
4-2
Repair Information
Factory Defaults
lists the defaults for the passwords, and IP, subnet, and
gateway addresses.
Procedural Notes
NOTE:
EFCM and Product Manager screens in this manual may not match
the screens on your server and workstation. The title bars have been removed
and the fields may contain data that does not match the data seen on your
system.
and the fields may contain data that does not match the data seen on your
system.
The following procedural notes are referenced in applicable repair
procedures. The notes do not necessarily apply to all procedures in
the chapter.
procedures. The notes do not necessarily apply to all procedures in
the chapter.
1. Before performing a repair procedure, read the procedure
carefully and thoroughly to familiarize yourself with the
information and reduce the possibility of problems or customer
down time.
information and reduce the possibility of problems or customer
down time.
2. When performing procedures described in this chapter, heed all
WARNING
and CAUTION statements, and other statements
listed in the preface of this manual.
3. After completing steps of a detailed procedure that is referenced
from another procedure, return to the initial (referencing)
procedure and continue to the next step of that procedure.
procedure and continue to the next step of that procedure.
4. After replacing a FRU, extinguish the System Error light-emitting
diode (LED) on the front of the switch.
Table 4-1
Factory-Set Defaults
Item
Default
Customer password
password
Maintenance password
level-2
IP address
10.1.1.10
IP address (factory preset)
10.1.1.10
Subnet mask
255.0.0.0
Gateway address
0.0.0.0