McDATA 3232 Manual Do Utilizador

McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual

•

 the type of attached device. This information is 

supplied by the device (if supported). Node types include:

— Unknown or other.

— Hub, switch, gateway, or converter.

— Host or host bus adapter (HBA).

— Proxy  agent.

— Storage device or storage subsystem.

— Module.

— Software driver.

•

 the eight-byte (16-digit) world-wide name (WWN) 

assigned to the port or Fibre Channel interface installed on the 
attached device.

— If a nickname is not assigned to the WWN, the WWN is 

prefixed by the device manufacturer’s name. 

— If a nickname is assigned to the WWN, the nickname appears 

in place of the WWN.

•

 the buffer-to-buffer credit (BB_Credit) value assigned 

to a port attached to a device. The value (normally 1 through 16 
inclusive) determines the frame buffers available for the port. 
Ports configured for extended distance operation are assigned a 
BB_Credit value of 60.

The Performance View displays statistical information about the 
performance of the ports. The information is useful to maintenance 
personnel for isolating port problems. For information about the 
Performance View, refer to 

 on page 4-22.

The Zone Set view (

) displays a list of the active zone set, 

including all zones and zone members. The active zone set name 
appears at the top of the list, followed by zone names, followed by 
zone members for each name.The table at the top of the view 
indicates if the default zone is enabled or disabled. 

To open the Zone Set view, click the Zone Set tab at the bottom of the 
Fabrics view on the EFC Manager main window