McDATA 3232 Manual Do Utilizador
A
Sphereon 3032/3232 Element Manager Messages
A-27
Messages
R
Message
R_A_TOV must be greater than E_D_TOV.
Description
R_A_TOV must be greater than E_D_TOV.
Action
Change one of the values so that R_A_TOV is greater than E_D_TOV.
Message
Resource is unavailable.
Description
The specified operation cannot be performed because the product is
unavailable.
unavailable.
Action
Verify that the EFC Server-to-product link is up. If the link is up, the
EFC Server may be busy. Try the operation again later.
EFC Server may be busy. Try the operation again later.
Message
Preferred Paths can not be enabled until the Domain ID is set to
Insistent. Disable Preferred Paths, then configure Switch
Parameters.
Insistent. Disable Preferred Paths, then configure Switch
Parameters.
Description
If the switch’s domain ID has not been set to Insistent, the user is not
allowed to activate the Preferred Path configuration with the Enable
Preferred Paths check box selected.
allowed to activate the Preferred Path configuration with the Enable
Preferred Paths check box selected.
Action
Close the Configure Preferred Paths dialog box and select the Configure
menu, then Operating Parameters, then Switch Parameters. On the
Configure Switch Parameters dialog box, select the Insistent check box.
menu, then Operating Parameters, then Switch Parameters. On the
Configure Switch Parameters dialog box, select the Insistent check box.
S
Message
Send firmware failed.
Description
Send firmware operation has failed.
Action
Retry the operation. If the condition persists, contact support
personnel.
personnel.