McDATA 3232 Manual Do Utilizador

The switch provides the following diagnostic software features that 
aid in fault isolation and repair of problems:

•

FRUs provide on-board diagnostic and monitoring circuits that 
continuously report FRU status to the SAN Management and 
element Manager applications. These applications provide 
system alerts and logs that display failure and diagnostic 
information at the management server or a remote workstation 
communicating with the management server.

•

The EFC Management Services (EMS) application that runs as a 
Windows 2000 service and provides an additional user interface 
to display operational status.

•

The SANpilot interface that provides Internet access to isolate 
problems for a single switch.

•

Unsolicited SNMP trap messages that indicate operational state 
changes or failures can be transmitted to up to 12 authorized 
management workstations.

•

E-mail messages or call-home reports provide automatic 
notification of significant system events to designated support 
personnel or administrators.

Access Element Managers for director and switch products through  
SAN management application. Right-click the product icon on the 
application Physical Map (topology) and select Element Manager from 
the pop-up menu.

In the following figure, the Model XXXX under the product icon will 

be replaced with an actual switch or director model number in your SAN 
management application Physical Map (topology).