McDATA 4500 Manual Do Utilizador
3
3-26
Configuring the Switch
Figure 3-14
Configure Threshold Alerts Dialog Box - Alerts Activated
Modify an Alert
Use the following steps to modify an existing threshold alert
configuration.
configuration.
1. Select Threshold Alerts from the Configure menu.
The Configure Threshold Alerts dialog box displays.
2. Select the alert that you want to modify by clicking the alert
information in the table.
3. If the alert is active, select Deactivate, then select the alert
information in the table again.
4. Select Modify.
If the alert is active, an error message displays prompting you deactivate
the alert.
the alert.
An initial Modify Threshold screen appears where you can change
the threshold type.
the threshold type.
5. Select a threshold type from the drop-down list.
6. Select Next when you are done. A Modify Threshold screen appears
where you can change the % utilization, cumulative minutes for
the threshold to occur before notification, and the time interval
for measuring throughput and for alert notification.
the threshold to occur before notification, and the time interval
for measuring throughput and for alert notification.