McDATA IPS4300 Manual Do Utilizador
Event Code Tables
A-1
A
Event Code Tables
An event is a state change, problem detection, or problem correction
that requires attention or should be reported to service personnel. An
event usually indicates an operational state transition, but may also
indicate an impending state change (threshold violation) or provide
information only. Events are reported as event codes. This appendix
lists three-digit event codes. The codes are listed in numerical order
and tabular format as follows:
that requires attention or should be reported to service personnel. An
event usually indicates an operational state transition, but may also
indicate an impending state change (threshold violation) or provide
information only. Events are reported as event codes. This appendix
lists three-digit event codes. The codes are listed in numerical order
and tabular format as follows:
•
000
through 199 - system events.
•
300
through 399 - fan events.
•
400
through 499 - control processor (CTP) card events.
•
500
through 599 - port events.
•
800
through 899 - thermal sensor events.
Events are recorded in the Event Log at the Enterprise Fabric
Connectivity Manager (EFCM) Basic Edition interface. An event
illuminates the system error light-emitting diode (LED) at the product
front panel.
Connectivity Manager (EFCM) Basic Edition interface. An event
illuminates the system error light-emitting diode (LED) at the product
front panel.
Tables in this appendix also provide a:
•
Message -
a text string that describes the event.
•
Severity -
a severity level that indicates event criticality as
follows: