Minicom Advanced Systems 232 IP Manual Do Utilizador
SMART 216 / 232 IP
23
Password Policy
For local and remote users you have the option of a standard or high security level
of password. The table below shows the parameters of the 2 options.
of password. The table below shows the parameters of the 2 options.
Standard security policy
High security policy
6 characters or more
8 characters or more must include at least 1 digit
and 1 upper case letter and 1 “special” character
as follows !@#$%^*()_-+=[]’:;?/{}
and 1 upper case letter and 1 “special” character
as follows !@#$%^*()_-+=[]’:;?/{}
Must not include the user name
Must not include the user name
Check the box to enable the high security password policy. Unchecked, the
standard security policy applies.
standard security policy applies.
OSD password enabled - For the local user access to the OSD can be password
enabled or disabled (default), with the option of a standard or high security level of
password as explained above. Select the checkbox to enable password.
enabled or disabled (default), with the option of a standard or high security level of
password as explained above. Select the checkbox to enable password.
Note! The user access permissions are the same whether access in done locally or
remotely.
remotely.
Idle Timeout – Select the Timeout inactivity period after which the user is
disconnected from the system. Choose No Timeout to disable Timeout.
disconnected from the system. Choose No Timeout to disable Timeout.
19. Security > SSL Certificate
You can install an SSL certificate.
To do so:
From the menu, select SSL Certificate, the install SSL Certificate page appears,
see Figure 22.
see Figure 22.
Figure 22 Install SSL Certificate page
Certificate File - Browse to locate the cer file (.ssl format).
Private Key File - Browse to locate the private key file (.pem format).
Key Password – Type the Key password.
Click
. The certificate installs. The device restarts automatically.