Alloy Computer Products GSM-8T16SFP Manual Do Utilizador
GSM Series User Manual
81
Alloy Computer Products Pty Ltd Copyright ©2006
3-13-2. STP Configuration
Fig. 3-51
Function name:
STP Configuration
Function description:
Used to configure the spanning tree parameters including, enabling and disabling,
selecting to use STP or RSTP and you can also change the Bridge Priority, Hello Time,
Max. Age and Forward Delay parameters.
selecting to use STP or RSTP and you can also change the Bridge Priority, Hello Time,
Max. Age and Forward Delay parameters.
Parameters description:
Spanning Tree protocol:
Used to Enable or Disable the Spanning Tree Protocol.
Bridge Priority:
The lower the bridge priority value is, the higher the priority it has. Usually, the
switch with the highest bridge priority is the root. If you wish the GSM Series
switch to be the root bridge you will need to ensure that other bridges on your
network have a higher bridge priority than that of this switch. The valid value is 0
– 61440.
switch with the highest bridge priority is the root. If you wish the GSM Series
switch to be the root bridge you will need to ensure that other bridges on your
network have a higher bridge priority than that of this switch. The valid value is 0
– 61440.
Default: 32768
Hello
Time:
The Hello Time is used to determine the periodic time to send normal BPDU
messages from the designated ports among all bridges on your network. It
determines how long a bridge should send this message to other bridges to tell
them I am alive. When the GSM Series switches are the root bridge of the
network, for example all other bridges will use the hello time assigned by this
switch to communicate with each other. The valid value is 1 – 10 seconds.
messages from the designated ports among all bridges on your network. It
determines how long a bridge should send this message to other bridges to tell
them I am alive. When the GSM Series switches are the root bridge of the
network, for example all other bridges will use the hello time assigned by this
switch to communicate with each other. The valid value is 1 – 10 seconds.
Default: 2 seconds