Adtran 4200659L1 Manual Do Utilizador
Chapter 3. Configuration
3-40
MX2800 STS-1 User Manual
61200659L1-1
Load Default Settings
Select
L
OAD
D
EFAULT
S
ETTINGS
from the
U
TILITIES
menu. The
screen will display
!WARNING! Defaulting configuration will disrupt
traffic on all ports.
Select
C
ONFIRM
to proceed or press
Esc
to abort.
Update FLASH Software
Select
U
PDATE
F
LASH
S
OFTWARE
from the
U
TILITIES
menu to update
software using either XMODEM protocol or Trivial File Transfer
Protocol (TFTP).
Protocol (TFTP).
Update Via XMODEM
Select
U
PDATE
VIA
XMODEM
from the
U
PDATE
FLASH S
OFTWARE
menu; then select
1-S
TART
to begin the transfer. Once you select
1-S
TART
from this menu, start the XMODEM transfer from your
terminal menu program (the XMODEM utility is available under
most terminal programs). If you wish to cancel a transfer in
progress, press
most terminal programs). If you wish to cancel a transfer in
progress, press
Ctrl
-
X
three times.
Loading the default settings will disable all STS-1 ports.
The IP Address, Default Gateway, and subnet mask will not be reset
when default settings are loaded.
when default settings are loaded.
This function is available only when updating the software through the
CRAFT
port.