Adtran ADT-1234POE Manual Do Utilizador

 Physical Descriptions

NetVanta 1000/1000R Series Hardware Installation Guide

 24

Copyright © 2008 ADTRAN, Inc.

61200500L1-34N

•

AOS Documentation CD 

•

A detachable power cable with a grounded, three-prong plug

•

•

Warranty card

International shipments of the NetVanta 1224STR include the following items:

•

NetVanta 1224STR base unit

•

AOS Documentation CD 

•

All necessary power cords

•

•

Warranty card

The NetVanta 1224STR and the NetVanta 1224STR PoE front panels are shown below. Table 1 on page 33 
describes all of the LEDs, and Appendix A on page 67 shows the connector pinouts.

The NetVanta 1224STRs contain 24 10/100BaseT Ethernet interfaces (RJ-45). These interfaces are 
consecutively numbered 1 through 24, from left to right, with the numbers screened directly above 
each port. Status LEDs for each of these interfaces are located directly over these numbers. 

The NetVanta 1224STR PoE also has green and red PoE status LEDs located in the upper left and 
upper right corners (respectively) of each Ethernet connector. 

The NetVanta 1224STR front panel contains one Gigabit Ethernet interface that provides one fixed 
RJ-45 connector and one standard SFP slot for fiber connectivity. (Use either the RJ-45 connector or 
the SFP slot. The fiber slot has precedence.) This interface is labeled 

, and the status LED is located 

to the left of RJ-45 port 1, above the 

LED.

The NetVanta 1224STR PoE front panel contains two Gigabit Ethernet interfaces and two standard 
SFP slots. (Use either the RJ-45 connectors or the SFP slots. The fiber slots have precedence.) These 
interfaces are labeled 

 and 

, and the status LEDs are located above the SFP slots.