Adtran ADT-1234POE Manual Do Utilizador

NetVanta 1000/1000R Series Hardware Installation Guide

 Physical Descriptions

61200500L1-34N

Copyright © 2008 ADTRAN, Inc.

31

Each NetVanta 1524ST unit is shipped in its own cardboard shipping carton. Open each carton carefully, and 
avoid deep penetration into the carton with sharp objects. 

After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in transit, 
immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the Repair and 
Replacement section of the Support page on the ADTRAN website at http://www.adtran.com/support).

Domestic shipments of the NetVanta 1524ST include the following items:

•

NetVanta 1524ST base unit

•

AOS Documentation CD 

•

A detachable power cable with a grounded, three-prong plug

•

•

Warranty card

International shipments of the NetVanta 1524ST include the following items:

•

NetVanta 1524ST base unit

•

AOS Documentation CD 

•

All necessary power cords

•

•

Warranty card

The NetVanta 1524ST front panel is shown below. Table 1 on page 33 describes all of the LEDs, and 
Appendix A on page 67 shows the connector pinouts.

The NetVanta 1524ST front panel contains 24 10/100/1000BaseT Ethernet interfaces (RJ-45). These 
interfaces are consecutively numbered 1 through 24, from left to right, with the numbers screened 
directly above each port. Status LEDs for each of these interfaces are located directly over these 
numbers. 

The NetVanta 1524ST front panel contains four standard SFP slots for fiber connectivity. These 
interfaces are numbered 21 through 24. Status LEDs for each of these slots are located directly over 
these numbers.

The status LEDs are located to the lower left of RJ-45 port 1. The 

LED indicates whether the unit 

is a member of a stack. The 

LED indicates the unit’s status.