Adtran 4200659L6 Manual Do Utilizador
Chapter 2. Installation and Operation
2-12
MX2800 User Manual
61200659L1-1
The MX2800 STS-1
M
AIN
M
ENU
consists of the following sections:
Status
Provides information on the current state of the STS-1, power
supplies, system, and VT/Port lines. For more detailed information,
see Chapter 4, Status.
supplies, system, and VT/Port lines. For more detailed information,
see Chapter 4, Status.
Statistics
Provides detailed statistical information (both current and
historical) for the STS-1, VT, and Port lines. For more detailed
information, see Chapter 5, Statistics.
historical) for the STS-1, VT, and Port lines. For more detailed
information, see Chapter 5, Statistics.
Configuration
Sets STS-1 network, VT/Port, and system management parameters.
For more detailed information, see Chapter 3, Configuration.
For more detailed information, see Chapter 3, Configuration.
Diagnostics
Performs loopback tests over the STS-1, VT/Port lines. For more
detailed information, see Chapter 6, Diagnostics.
detailed information, see Chapter 6, Diagnostics.
Logout
The
L
OGOUT
selection ends the terminal session and logs out of the
system. Password entry is required before a new session can begin.
The unit will also logout of a terminal session automatically if the
session remains inactive for a certain period of time. For more
information, see Terminal Timeout on page 3-35.
The unit will also logout of a terminal session automatically if the
session remains inactive for a certain period of time. For more
information, see Terminal Timeout on page 3-35.
ACO Buttons
The
ACO
(alarm cut off) buttons allow you to turn off an active
audible alarm. The buttons are recessed, so you must use a pen or
other pointed instrument to press them. Once you have used an
other pointed instrument to press them. Once you have used an
ACO
end the terminal
session
session
Ctrl-C
refresh the display
Ctrl-R
If you want to...
Press...