Adtran 4200659L6 Manual Do Utilizador
Chapter 3. Configuration
3-14
MX2800 STS-1 User Manual
61200659L1-1
Management Options
Local IP Address
Enter the MX2800 STS-1 IP address. This IP address applies to the
LAN or modem port (when configured for PPP or SLIP). This
address is available from your network administrator.
LAN or modem port (when configured for PPP or SLIP). This
address is available from your network administrator.
Gateway IP Address
Enter the gateway IP address of the MX2800 STS-1. This address is
necessary only if the MX2800 STS-1 and the network manager are
connected through a gateway node. If an IP packet is to be sent to a
different network, the unit sends it to the gateway.
necessary only if the MX2800 STS-1 and the network manager are
connected through a gateway node. If an IP packet is to be sent to a
different network, the unit sends it to the gateway.
Subnet Mask
Enter the subnet mask of the MX2800 STS-1. This address is
available from your network administrator.
available from your network administrator.
Management Port
Assign the management port as either LAN or Modem. The Modem
setting applies only to units equipped with an internal modem.
setting applies only to units equipped with an internal modem.
Dialup Options
Configure the dialup capabilities of the MX2800 STS-1 (see Figure
3-10 on page 3-15). These options apply only to units equipped
with an internal modem.
3-10 on page 3-15). These options apply only to units equipped
with an internal modem.