Adtran 1280050L1 Folheto

For more detailed documentation, visit us online at  

www.adtran.com

Quick Start Guide, 61280050L1-13A, January 2005

Technical Support 1-888-4ADTRAN (1-888-423-8726)

Copyright 

© 2005 ADTRAN, All Rights Reserved

(4) 10BaseT/100BaseTX interfaces with auto MDI/MDIX 
crossover on all interfaces

Back-pressure flow control on all half-duplex interfaces
Pause-frame flow control on full-duplex interfaces

Operating Temperature: -25°C to 65°C
Storage Temperature: -20°C to 70°C
Relative Humidity: Up to 95% non-condensing

FCC Part 15, Class A

1

RX1

Attached Equipment

Receive Positive

2

RX2

Attached Equipment

Receive Negative

3

TX1

Module

Transmit Positive

4, 5

UNUSED

N/A

—

6

TX2

Module

Transmit Negative

7, 8

UNUSED

N/A

—

1.

Remove the cover plate from the appropriate option slot in the TRACER 
rear panel.

2.

Slide the TRACER Ethernet Switch Module into the option slot until the 
module is firmly positioned in the chassis.

3.

Secure the thumbscrews at both edges of the module. Tighten with a 
screwdriver.

4.

Connect the cables to the associated device(s).

5.

Complete installation of remaining modules and system as specified in 
the TRACER 6000 Series System Manual.