Trendnet 10/100Mbps mini Print Server Manual Do Utilizador
To start the NDPS Manager whenever you bring up the server, add a command like
the following to your server's AUTOEXEC.NCF file:
LOAD NDPSM SerMGR.TeSupp
The last item is the name of the NDPS Manager object you wish to load.
the following to your server's AUTOEXEC.NCF file:
LOAD NDPSM SerMGR.TeSupp
The last item is the name of the NDPS Manager object you wish to load.
9. After creating an NDPS Manager, you can create NDPS printers by using NetWare
Administrator, as explained below.
Creating an NDPS Printer Agent
To create Public Access Printers using the NDPS Manager Object in NetWare Administrator,
follow this procedure:
follow this procedure:
1. Start the NDPS Manager object you will be using to control the Printer Agent.
2. At
the
Identification page, click the Printer Agent List.
3. Click
New to see the Create Printer Agent window, as shown below.
Figure 43: Create Printer Agent
4. Enter the desired name for the Printer Agent (PA) Name.
5. Normally,
the
NDPS Manager will be the NDPS Manger object you are using.
6. Select
Novell Printer Gateway in the Gateway Type. (see figure2 above)
7. Click
OK and then select the available printer.
8. Select
Remote (LPR on IP) in the Connection Type.
9. Click
Next to see the following Configure Port Handler screen.
Figure 44 Configure Port Handler
Page 68