Acer G701 Manual Do Utilizador

105

Installing the system into the rack

To install the system into the rack:

1

Remove the front bezel from the server.  Refer to “Removing the 
front bezel” on page 33 for instructions.

2

Remove the top panel of the server. 

(1)     Use a screw driver to remove the two rear screws holding the 

top panel to the chassis. 

(2)     Slide the top panel  backward to detach it from the chassis. 

3

Remove the rubber foot stands from the server. 

(1)     Lay the server on its side on a flat, stable surface.

(2)     Use the flat side of a screw driver to remove the plug from 

the foot stands.  Keep these plugs for later use. 

AA G701 - EN.book  Page 105  Tuesday, February 25, 2003  5:19 PM