Acer G701 Manual Do Utilizador
37
Configuring the hot-swappable cage
This section includes instructions for removing and installing the
hot-swappable cage as well as procedures on how to install a hard disk
into the cage’s hard disk carrier.
into the cage’s hard disk carrier.
Note: The hot-swap SCSI HDD Cages can not be cascaded for
Altos G701 model.
Altos G701 model.
Removing the hot-swappable cage
Important: Before detaching the hot-swappable cage from the
chassis, make sure to first remove all hard disks from their carriers.
For instructions, refer to the succeeding section.
chassis, make sure to first remove all hard disks from their carriers.
For instructions, refer to the succeeding section.
1
Detach the chassis panels and remove the air baffle.
2
Loosen the four thumbscrews that secure the cage to the chassis
(1).
(1).
3
Slightly pull out the cage from the chassis (2).
4
Disconnect the following cables from the cage:
a
SCSI cable
AA G701 - EN.book Page 37 Tuesday, February 25, 2003 5:19 PM