Sun Microsystems V490 Manual Do Utilizador
Chapter 7
Configuring Console Access
127
If at all possible, back up system data before starting this procedure. Also halt all
applications and warn users of the impending loss of service. For information about
the appropriate backup and shutdown procedures, see Solaris system administration
documentation.
applications and warn users of the impending loss of service. For information about
the appropriate backup and shutdown procedures, see Solaris system administration
documentation.
What to Do
1. Decide which method you need to use to reach the ok prompt.
See “About the ok Prompt” on page 49 for details.
2. Refer to
for instructions.
How to Attach a Twisted-Pair Ethernet
Cable
Cable
Before You Begin
■
Complete the prerequisite installation steps in Chapter 1.
TABLE 7-1
Ways of Accessing the ok Prompt
Access Method
What to Do
Graceful halt
• From a console window (dtterm, for example), issue an
appropriate command (for example, the shutdown,init,
halt
halt
, or uadmin command) as described in Solaris system
administration documentation.
Stop-A (L1-A) or
Break
key sequence
Break
key sequence
• From a Sun keyboard, hold down the Stop and A keys
simultaneously.
–or–
–or–
• From a connected alphanumeric terminal, press the Break key.
Externally initiated
reset (XIR)
reset (XIR)
• From the system controller, type the xir command.
Manual system reset
• Press the front panel Power button and hold it for five seconds.
–or–
• From the system controller, type the reset command.