Sun Microsystems V490 Manual Do Utilizador
178
Sun Fire V490 Server Administration Guide • August 2004
5. Type the appropriate command and numbers for the tests you want to run.
For example, to run all available OpenBoot Diagnostics tests, type:
To run a particular test, type:
where
#
represents the number of the desired test.
For a list of OpenBoot Diagnostics test commands, see “Interactive OpenBoot
Diagnostics Commands” on page 87. The numbered menu of tests is shown in
Diagnostics Commands” on page 87. The numbered menu of tests is shown in
.
6. When you are done running OpenBoot Diagnostics tests, exit the test menu. Type:
The ok prompt reappears.
7. Set the auto-boot? diagnostic configuration variable back to true
.
Type:
This allows the operating system to resume starting up automatically after future
system resets or power cycles.
system resets or power cycles.
What Next
Have a qualified service technician replace the FRU or FRUs indicated by OpenBoot
Diagnostics error messages, if any. For replacement instructions, see:
Diagnostics error messages, if any. For replacement instructions, see:
■
Sun Fire V490 Server Parts Installation and Removal Guide
This document is included on the Sun Fire V490 Documentation CD.
obdiag> test-all
obdiag> test #
obdiag> exit
ok setenv auto-boot? true