Sun Microsystems V490 Manual Do Utilizador
60
Sun Fire V490 Server Administration Guide • August 2004
Device Paths
When manually deconfiguring and reconfiguring devices, you might need to
determine the full physical paths to those devices. You can do this by typing:
determine the full physical paths to those devices. You can do this by typing:
The show-devs command lists the system devices and displays the full path name
of each device. An example of a path name for a Fast Ethernet PCI card is shown
below:
of each device. An example of a path name for a Fast Ethernet PCI card is shown
below:
You can display a list of current device aliases by typing:
You can also create your own device alias for a physical device by typing:
where alias_name is the alias that you want to assign, and physical_device_path is the
full physical device path for the device.
full physical device path for the device.
Note –
If you manually deconfigure a device alias using asr-disable, and then
assign a different alias to the device, the device will remain deconfigured even
though the device alias has changed.
though the device alias has changed.
You can determine which devices are currently disabled by typing:
The related deconfiguration and reconfiguration procedures are covered in:
■
■
Device identifiers are listed in “Reference for Device Identifiers” on page 61.
ok show-devs
/pci@8,700000/pci@2/SUNW,hme@0,1
ok devalias
ok devalias
alias_name physical_device_path
ok .asr